Armour
Checked against patch 0.5.5 · confidence: verified · topic id armour
Every rule below comes from the game's own reference text, game data or patch notes (see Sources). The exceptions are marked (PoB): the developers have not published those. They come from Path of Building's calculation code or data, and the text says where players or the wiki confirm them.
What armour does
Armour reduces damage taken from hits. By default it applies only to physical damage. The reduction depends on the size of the hit: armour is more effective against small hits. It does nothing against damage over time.
Formula
physical damage reduction = armour / (armour + 10 x hit damage) (PoB)
The game states the shape of this rule, but the developers have never published the formula. The constant 10 is measured by players: Path of Building uses it, and players on the official forum give the same formula right after patch 0.1.1 and again during patch 0.3. Guides written at launch say 12: patch 0.1.1 made armour "more effective, by approximately 15%", and the measured constant moved from 12 to 10 with it.
- Physical damage reduction is capped at 90% for characters, together with other sources of it.
- Armour cannot reduce a hit to 0. The hit deals at least 1 damage (patch 0.4.0).
Pipeline for a physical hit
- The hit's damage is known after the attacker's own modifiers (its pre-mitigation damage).
- Reduction from armour is computed from that damage.
- Other "additional Physical Damage Reduction" is added, and the sum is capped (PoB).
- The hit is multiplied by
1 - reduction. Modifiers to damage taken apply after this (seedamage-taken-order).
Worked example
You have 6,000 Armour.
small hit 200: 6000 / (6000 + 2000) = 75% reduction -> 50 taken
medium hit 600: 6000 / (6000 + 6000) = 50% reduction -> 300 taken
big hit 2000: 6000 / (6000 + 20000) = 23% reduction -> 1,538 taken
Armour is strong against many small hits and weak against single large hits. To take half of a hit of size H you need 10 x H armour.
Armour applying to other damage
Tree 0.5.5 has "+#% of Armour also applies to Elemental Damage" on 39 main-tree nodes, and gear has similar lines. Path of Building uses the stated share of your armour in the same formula against a hit of that type (PoB). A developer confirmed on the official forum that armour is applied to the damage first and resistance after it, so the two multiply. Example: 6,000 Armour with 40% applying to elemental damage acts as 2,400 armour against an elemental hit. Against a 600 elemental hit that is 2400 / (2400 + 6000) = 29% reduction; with 75% resistance you take 600 x 0.71 x 0.25 = 107.
Armour break
- Some skills and effects break armour: they lower the target's Armour by an amount.
- At 0 the armour is Fully Broken for 12 seconds (4 seconds on players). Monsters with Fully Broken Armour also take 20% increased physical damage from hits.
- Players break 3 times as much armour against Normal monsters and 2 times as much against Magic monsters.
- A few effects break armour below 0. Negative armour means more physical damage from hits, limited by the enemy's base armour.
- Armour break only affects hits. It does not change Bleeding damage.
Tree planning notes
- "#% increased Armour" (71 main-tree nodes) and the hybrid "increased Armour and Evasion Rating" (33) are percentages of the armour on your gear. Without armour gear they do nothing.
- Because reduction depends on hit size, armour pairs well with a large life pool and with a second layer for big hits (block, deflection, a damage-taken modifier).
Common mistakes
- PoE1 habit: using the PoE1 constant (5) in the formula.
- Outdated guides: using the launch constant (12).
- Quoting one "physical damage reduction" percentage. It is only true for one hit size.
- Expecting armour to reduce bleeding, poison, ignite or other damage over time.
- Expecting armour to reduce elemental hits without one of the "also applies" modifiers.
Sources
- Game reference text (keywords Armour, Armour Break, Armour Break below 0, Physical Damage, Pre-mitigation Damage, Bleeding), read on poe2db.tw on 2026-11-16 with the game at patch 0.5.5
- Official patch notes, read on the mirror poe2db.tw/us/Version_<n>: 0.1.1 (Armour made more effective, by approximately 15%), 0.2.0 (fully broken armour), 0.4.0 (armour cannot reduce a hit to 0)
- Game data exported in Path of Building PoE2 (dev 601768b) src/Data/Misc.lua: maximum_physical_damage_reduction_% = 90 for characters and 75 for monsters
- Path of Building PoE2 (dev 601768b) src/Modules/CalcDefence.lua calcs.armourReductionF and damageMitigationMultiplierForType; src/Modules/Data.lua ArmourRatio = 10 (12 until commit 3e5bdc2d of 2025-01-19)
- Official forum, pathofexile.com/forum/view-thread/3788776: developer Mark_GGG, 2025-06-13: 'Armour is fully applied to damage, mitigating some of the value, before resistances apply.'
- Players on the official forum give the same formula with 10: view-thread/3707734 (2025-01-24, 'The old formula just had a 12 instead of a 10') and view-thread/3850890 (2025-09-11)
- GGG passive tree export 0.5.5: '#% increased Armour' (71 nodes), '+#% of Armour also applies to Elemental Damage' (39 nodes), '#% increased Armour and Evasion Rating' (33 nodes)